AMPP Internal Corrosion for Pipelines - Level 2 Sample Questions:

1. When performing a hardness test on a coating which has elastic properties the inspector is likely to observe:

A) A very low reading
B) A very high reading
C) Cold (low or creep
D) No difference from any other coating

2. Linings are used on the interior of pipelines to

A) provide protection against soil chemicals.
B) protect the transported product.
C) reduce magnetic polarity.
D) afford limited temperature Insulation.

3. When ASTM D 3363 Is specified the Inspector must:

A) Record the highest value attained
B) Use the correct solvent
C) Record the two end points identified in the standard
D) Record the percentage of failure

4. Non-Conformance Reports are designed to:

A) Punish the Contractor for substandard work
B) Assist the Owner in negotiating credits from the Contractor
C) To Identify items that do not meet the specification requirements
D) Elevate the status of the Inspector

5. When measuring the Dry Film Thickness of liquid coatings applied to galvanized ferrous substrates the most commonly used instrument Is the:

A) Ultra Sonic DFT Gauge
B) Magnetic Gauge
C) Tooke Gauge
D) Eddy Current Gauge

Solutions: