H3CNE GB0-191-ENU Dumps | Updated Sep 04, 2024 - PracticeMaterial
Master 2024 Latest The Questions H3CNE and Pass GB0-191-ENU Real Exam!
The GB0-191-ENU exam covers a wide range of topics related to network design, including network topology, routing, switching, VLANs, security, and wireless networking. GB0-191-ENU exam also requires candidates to have a solid understanding of H3C products and solutions, including routers, switches, and access points.
NEW QUESTION # 97
If a port running STP in the Ethernet switch receives and forwards data, receives, processes and sends BPDUs, and performs address learning, then the port should be in the ______ state.
- A. Forwarding
- B. Listening
- C. Waiting
- D. Learning
- E. Disable
- F. Blocking
Answer: A
NEW QUESTION # 98
As shown in the figure, S3610 switch SWA uses ports E1/0/1 and E1/0/2 to connect to another switch SWB. In order to increase bandwidth, static link aggregation needs to be configured on the switch.
Which of the following configuration is correct? (multiple choice)
- A. [SWA] interface bridge-aggregation 1
- B. [SWA]interface bridge-aggregation 1 port Ethernet1/0/1 Ethernet1/0/2
- C. [SWA-Ethernet1/0/1] port link-aggregation group 1
- D. [SWA-Ethernet1/0/2] interface bridge-aggregation 1
Answer: A,C
NEW QUESTION # 99
Which of the following advantages does the OSI reference model have? (multiple choice)
- A. None of the above statements are correct.
- B. The OSI reference model provides compatibility and standard interfaces between devices and promotes standardization.
- C. An important feature of the OSI reference model is its layered architecture. The layered design method can transform a large and complex problem into several smaller and easy-to-handle problems.
- D. The OSI reference model is a theoretical description of the information transmission process that occurs between network devices, and defines how to implement each layer of functions through hardware and software.
Answer: B,C
NEW QUESTION # 100
The IP address 112.1.1.1 corresponds to the network address of the natural classification network segment.
Answer:
Explanation:
112.0.0.0
NEW QUESTION # 101
On the MSR router, if you want to download files from FTP Server, you should use the ______ command in the FTP command.
- A. put
- B. load
- C. get
- D. download
Answer: C
NEW QUESTION # 102
An empty-configured MSR router is connected to the local LAN user through the GE0/0 interface, and directly connected to the remote router through the S1/0 interface. The IP addresses of GE0/0 interface and S1/0 interface are 10.1.1.1/24 and 172.16.1.1/30 respectively.
In order to ensure the intercommunication with remote LAN users, the following routes are configured on the MSR:
[MSR] ip route 10.20.0.0 255.255.255.0 s1/0
After the configuration, the MSR receives the data packet sent to the destination address 10.20.0.254/24. After the static route is found in the routing table, how will the MSR deal with the data packet next?
- A. Parse the MAC address of the S1/0 interface, update the destination MAC address, and then re-encapsulate the IP packet
- B. Encapsulate the IP packet into a frame conforming to the S1/0 interface link, and then forward it from the S1/0 interface
- C. The packet is discarded because the next hop address is not listed in the routing table
- D. Find the IP address corresponding to interface S1/0, and then forward the IP packet from interface S1/0
- E. The packet is discarded because the destination host is not listed in the routing table
Answer: B
NEW QUESTION # 103
After executing the display command on the switch SWA, the switch output is as follows:
<Switch>display link-aggregation summary
Aggregation Interface Type:
BAGG - Bridge-Aggregation, RAGG - Route-Aggregation
Aggregation Mode: S - Static, D - Dynamic
Loadsharing Type: Shar - Loadsharing, NonS - Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG AGG Partner ID Select Unselect Share
Interface Mode Ports Ports Type
-------------------------------------------------- --------------------
BAGG1 S none 3 0 Shar
It can be judged from the above output ______. (Multiple choice)
- A. The aggregation group contains 3 active ports
- B. There is no active port in the aggregation group
- C. The type of aggregation group is dynamic aggregation
- D. The type of aggregation group is static aggregation
Answer: A,D
NEW QUESTION # 104
The IP address 10.0.10.32 and the mask 255.255.255.224 represent a ______.
- A. Network address
- B. Broadcast address
- C. host address
- D. None of the above
Answer: A
NEW QUESTION # 105
Which part of the subnet division technology is implemented on the basis of the natural classification of IP address division?
- A. Subnet number part
- B. host number part
- C. prefix part
- D. Network number part
Answer: A
NEW QUESTION # 106
A network administrator configured on a router
RIP: rip 1
version 2
network 100.0.0.0
network 8.0.0.0
However, it is found that the RIP route of the opposite end cannot be learned. The administrator needs to enable RIP debugging information on the router. Which of the following configurations can be used to view RIP debugging information on the router?
- A. <MSR>debugging rip packet
- B. <MSR>debugging rip 2
- C. <MSR>debugging rip 1 packet
- D. [MSR] debugging rip packet
Answer: C
NEW QUESTION # 107
The subnet mask of the IP address 132.119.100.200 is 255.255.255.224, so the IP subnet address where it is located is ______.
- A. 132.119.100.0
- B. 132.119.100.192
- C. 132.119.100.193
- D. 132.119.100.128
Answer: B
NEW QUESTION # 108
According to the definition of the OSI seven-layer reference model, _____ is responsible for providing flow control, checking the correctness of data transmission, and providing support for multiple upper-layer protocols. (Multiple choice)
- A. Physical layer
- B. Network layer
- C. Data link layer
- D. Presentation layer
- E. Session layer
- F. Network interface layer
- G. Transport layer
- H. Application layer
Answer: C,G
NEW QUESTION # 109
The three MSR routers RTA, RTB, and RTC are connected to the same frame relay network through their respective S1/0 interfaces. This frame relay network can provide enough PVC resources. As a network engineer, you need to assign IP addresses to these frame relay interfaces.
Which of the following statements is incorrect?
- A. If transit through any router is not allowed, at least three IP subnets are required to realize the two-by-two intercommunication of the three routers through this frame relay network
- B. If transit through any router is not allowed, at least two IP subnets are required to enable three routers to communicate with each other through this frame relay network
- C. Under the premise of correct routing configuration, three routers can communicate through this frame relay network without configuring sub-interfaces.
- D. Under the premise of correct routing configuration, three routers can communicate through this frame relay network with only one IP subnet.
Answer: A
NEW QUESTION # 110
The two MSR routers MSR-1 and MSR-2 are interconnected back-to-back through their S1/0 interfaces, and their GigabitEthernet0/0 interfaces are respectively connected to the client hosts HostA and HostB: HostA----GE0/0--MSR-1 --S1/0---------S1/0--MSR-2--GE0/0----HostB
By configuring the IP address and routing, HostA can communicate with HostB in the current network. Now the following ACL configuration is added to the router MSR-1:
acl number 3000
rule 0 deny icmp icmp-type echo
interface GigabitEthernet0/0
ip address 192.168.0.1 255.255.255.0
firewall packet-filter 3000 inbound
So which of the following statements are correct? (Multiple choice questions)
- A. Can't ping HostB on HostA
- B. Can ping HostB on MSR-1
- C. I cannot ping my gateway address on HostA, that is, the interface address of GE0/0 on MSR-1
- D. Can ping HostA on HostB
Answer: A,B,C,D
NEW QUESTION # 111
Use the ______ command to view the NAT table entries.
- A. display nat table
- B. display nat session
- C. display nat
- D. display nat entry
Answer: B
NEW QUESTION # 112
If you want to achieve the entire network interoperability, as shown in the figure, there are 4 ways to divide the OSPF area, which is reasonable? (multiple choice)
- A. Figure 4
- B. Picture 1
- C. Figure 3
- D. Picture 2
Answer: A,B,C,D
NEW QUESTION # 113
The broadcast address of the natural classification network segment corresponding to the IP address 125.1.1.1 is ____________.
Answer:
Explanation:
125.255.255.255
NEW QUESTION # 114
Divide a class B network segment into subnets. If the subnet mask is 22 bits, then the maximum number of hosts that can be accommodated in each subnet is __. (Please fill in Arabic numerals)
Answer:
Explanation:
1022
NEW QUESTION # 115
......
A fully updated 2024 GB0-191-ENU Exam Dumps exam guide from training expert PracticeMaterial: https://torrentking.practicematerial.com/GB0-191-ENU-questions-answers.html
