[Jan-2022] H3C GB0-341-ENU Exam: Basic Questions With Answers
New 2022 Realistic Free H3C GB0-341-ENU Exam Dump Questions and Answer
NEW QUESTION 110
WA1208E series, WA2100 series, and WA2200 indoor series can all use power adapters for DC power supply. What is the output voltage of the standard power adapter?
- A. 48V/0.5 A
- B. 24V/0.5 A
- C. 24V/1.0 A
- D. 48V/1.0 A
Answer: A
NEW QUESTION 111
C H3C wireless controller does C MAC authentication not only supports local authentication, but also can be realized with s Radius. The username and password are both ___.
- A. Client MAC
- B. 0
- C. H3C
- D. WX5002
Answer: A
NEW QUESTION 112
How to modify the name of the SSID in the wlan service-e template on the CH3C wireless controller?
- A. In the service-template view, first enter "service-template disable", then enter "ssid ***", and finally enter "service-template enable" to complete the modification of an SSID name
- B. Enter "ssid ***" directly in the service-template view to modify
- C. You cannot modify the name of the SSID in the wlan service-template, you can only delete the original service-template, then create a new service-template and enter the new SSID name to achieve the purpose of modifying the SSID name
- D. First enter "radio disable" in the radio view of the AP, and then enter "ssid***" in the service-template view to modify.
Answer: A
NEW QUESTION 113
Which of the following IEEE 802.11 protocols stipulates the security of wireless local area networks?
- A. 802.11n
- B. 802.11i
- C. 802.11h
- D. 802.11e
- E. 802.11a
Answer: B
NEW QUESTION 114
In point-to-point (PtP) wireless transmission, the most suitable antenna type is?
- A. Omnidirectional antennas at both ends
- B. One end omnidirectional antenna, one end directional antenna
- C. Directional antenna at both ends
Answer: C
NEW QUESTION 115
The message used by STA to terminate the authentication relationship is?
- A. Deassociation
- B. authentication
- C. thentication
- D. Association
Answer: B
NEW QUESTION 116
Which of the following descriptions of PAP product E PoE power supply requirements is correct? (Multiple choice)
- A. There is no requirement for the network cable connecting the AP to the upstream PoE power supply device.
- B. The length of the network cable is recommended to be within 100 meters when the AP uses PoE power supply
- C. AP can support PoE module power supply or PoE switch power supply.
- D. The network cable connecting the AP to the upstream PoE power supply device is recommended to be Category 5 or above
Answer: B,C,D
NEW QUESTION 117
Before performing access authentication and association, both STA and AP need to understand each other's information and perform capability level interaction. This process can be achieved through the broadcast or interaction of which of the following messages? (Multiple choice)
- A. Probe Request
- B. Probe Response
- C. Beacon
- D. Authentication Request
Answer: A,B,C
NEW QUESTION 118
When A2220X-P AGP working at 11a perishable bridge, default, and maximum ____ a peer device of the established bridge building, while the peer signal strength RSSI should at least be greater than _______ bridge in order to ensure stable operation.
- A. 2 ； 15
- B. 4 ； 15
- C. 2 ； 30
- D. 4 ； 30
Answer: C
NEW QUESTION 119
What does H3Care WLAN network optimization service include? (Multiple choice)
- A. Wireless network analysis
- B. Relocation of computer room
- C. Wireless network optimization plan
- D. Wireless optimization implementation and delivery
Answer: A,C,D
NEW QUESTION 120
The term used to describe the direction of the electric field of electromagnetic waves in space is?
- A. Diversity
- B. Gain
- C. Bandwidth
- D. Polarity
Answer: D
NEW QUESTION 121
In the wireless controller mode of WX3000 series or WX6103, you can return to the wireless control mode of the device through input ___.
- A. Ctrl+k
- B. Ctrl+b
- C. Ctrl+c
- D. Ctrl+p
Answer: A
NEW QUESTION 122
When the H3C AP is directly connected to a wireless switch or connected through a Layer 2 network, the correct registration steps are?
1. The AP sends out a Layer 2 broadcast discovery request message to try to contact a wireless switch
2. The AP downloads the latest software version and configuration from the wireless switch
3. The wireless switch that receives the discovery request message will check whether the AP has the permission to access the machine, and if so, it will respond with a discovery response
4. The AP obtains an IP address through the DHCP server
5. The AP starts to work normally and exchanges user data packets with the wireless switch
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 123
Which of the following are not the shortcomings of FAT AP?
- A. No wireless controller required, can work independently
- B. FAT AP software is stored on the AP, and the software needs to be upgraded one by one when the software is upgraded, which requires a lot of maintenance work
- C. Each FAT AP only supports individual configuration, and the configuration of a large network requires a huge workload for AP configuration.
- D. The configuration of FAT AP is saved on the AP, the loss of AP equipment can cause the leakage of system configuration
Answer: A
NEW QUESTION 124
In order to increase the ease of use, the FIT AP version of wireless products will no longer be released separately, and they will all be included in the corresponding wireless controller version packaging file.
- A. True
- B. False
Answer: A
NEW QUESTION 125
......
Guaranteed Success in H3CSE WLAN Certification GB0-341-ENU Exam Dumps: https://torrentking.practicematerial.com/GB0-341-ENU-questions-answers.html
