Reliable NCIE SAN E-Series NS0-516 Dumps PDF Mar 27, 2022 Recently Updated Questions
Pass Your Network Appliance NS0-516 Exam with Correct 180 Questions and Answers
NEW QUESTION 14
Based on this partitioning configuration, what volumes can Host Group Z "see"? (Volumes are color-coded for parti ions.)
- A. A, B, C
- B. E, F, H
- C. F, G, H
- D. B, C, G
Answer: D
NEW QUESTION 15
Barring a specific instruction from technical support or in the release notes, what software should be upgraded or installed first?
- A. Disk firmware
- B. Controller firmware
- C. ESM firmware
- D. SANtricity client
Answer: D
NEW QUESTION 16
Your company has deployed an E2824 and has decided to change the host protocol from iSCSI to FC You use the storage array profile to review the installed SFPs.
In this scenario, which set of supported data rates indicates that you are using dual-purpose SFPs?
- A. 25 Gbps, 10 Gbps
- B. 16 Gbps, 8 Gbps, 4 Gbps
- C. 32 Gbps, 16 Gbps, 8 Gbps, 4 Gbps
- D. 16 Gbps, 10 Gbps, 8 Gbps, 4 Gbps
Answer: D
NEW QUESTION 17
With a system cache block size of 32K, how much cache space per I/O is "lost" if incoming I/Os are all 48K writes? (Choose the best answer.)
- A. 16K
- B. 24K
- C. 0 - no space is lost
- D. 4K
- E. 8K
Answer: A
NEW QUESTION 18
A Snapshot group contains one repository for which associated objects?
- A. Base volume files
- B. Snapshot volumes
- C. Snapshot images
- D. Consistency groups
Answer: C
NEW QUESTION 19
A customer has an E5760 array with a 30-drive dynamic disk Pool (DDP) that uses 800 GB SSD drives.
The customer needs to expand the pool by one drive but has only a 1.6 TB SSD drive available.
In this scenario, what happens when the customer attempts to add the 1.6 TB drive to the existing pool?
- A. Online Proctored Whiteboard
- B. The pool is expanded by 1.6 T
- C. The pool is expanded by 800 GB
- D. The pool is expanded by 1.6 TiB
Answer: C
NEW QUESTION 20
A company has a duplex E-Series system that is operating in a highly tuned environment. Load distribution between the controllers has been manually set up to achieve a specific distribution based on unique workload characteristics.
In this scenario, to maintain this load distribution over time, which E-Series feature should be disabled?
- A. Automatic Node Balancer
- B. Automatic Load Balancing
- C. Storage Load Balancer
- D. DNS Load Balancing
Answer: B
NEW QUESTION 21
You have two Linux hosts that must be connected over multiple paths to two NetApp E-Series systems. One with FC and the other with SAS.
In this scenario, which mutipathing driver should you use for each system to complete this task?
- A. Use LVM for FC and SAS.
- B. Use DM-MP for FC and LVM for SAS.
- C. Use DM-MP for SAS and LVM for FC.
- D. Use DM-MP for FC and SAS.
Answer: D
NEW QUESTION 22
What does the storage system use to preserve cache data in the event of a complete controller failure? (Choose the best answer.)
- A. Read caching
- B. Pre-fetch caching
- C. Write caching
- D. Cache mirroring
- E. Flash read cache
Answer: D
NEW QUESTION 23
Exhibit:
Referring to the exhibit, which SAS connector is supported on the NetApp E2800 E-Series family?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 24
You are cabling drive expansion shelves for an E2800 storage system. In this scenario, which cabling method should you use?
- A. The controller A and the controller B SAS expansion ports (EXP1 & EXP2) should be divided between the A-side and B-side IOM-12 modules for all the expansion shelves.
- B. You use SAS expansion port EXP1 and reserve SAS expansion port EXP2 for a second drive expansion stack.
- C. The controller A and the controller B SAS expansion ports (EXP1 & EXP2) should not be divided between the A-side and B-side IOM-12 modules for all of the expansion shelves.
- D. You use SAS expansion port EXP2 and reserve SAS expansion port EXP1 for a second drive expansion stack.
Answer: A
NEW QUESTION 25
What four resources have information to determine space and power & cooling requirements for E-Series storage systems? (Choose four.)
- A. Site Prep Guide
- B. E-Series System Data Sheets
- C. Hardware cabling guide
- D. Install Guide
- E. Hardware Universe
- F. E-Series Power & Cooling Calculator
Answer: A,B,D,F
NEW QUESTION 26
What measurement refers to how much data can be handled in a given time period? (Choose the best answer.)
- A. Read modify write
- B. I/O alignment
- C. IOPS
- D. Throughput
- E. Parity
Answer: D
NEW QUESTION 27
An E2812 system, without expansion shelves, is configured with 12 Gb SAS host interface cards (HICS) and is directly connected to a host. However, the host cannot access the volumes.
In this scenario, which two troubleshooting steps should you take? (Choose two)
- A. Verify that the correct SAS ports are in use on the E2812 system
- B. Verify that the E2812 SAS CHAP secret is set.
- C. Verify that the E2812 host port SAS link up lights are illuminated
- D. Verify that the host can ping the E2812 system over the SAS link
Answer: A,C
NEW QUESTION 28
What SANtricity package(s) must be installed on a Windows server when it is acting as both a data host and a storage management host?
- A. The client, agent, and utilities
- B. The client and agent
- C. The client, failover driver, and agent
- D. The client
Answer: C
NEW QUESTION 29
According to NetApp recommended practices, is this E2712 storage system cabled for a dual-stack configuration? If not, why?
- A. No. The cabling has split the top-down-bottom-up configuration.
- B. No. The controllers are only cabled to one "stack."
- C. No. The cabling to the disk shelves is coming from the host ports.
- D. Yes. The cabling configuration is correct.
Answer: D
NEW QUESTION 30
If you want to mirror data from Los Angeles to New York (approximately a 5,000-km distance), which mirroring feature should you use?
- A. Synchronous
- B. Semi-synchronous
- C. Asynchronous
- D. Asynchronous synchronous mode
Answer: C
NEW QUESTION 31
Which two steps are required to enable multifactor authentication on an E-Series system? (Choose two)
- A. Configure LDAP
- B. Map roles
- C. Test SSO login
- D. Configure In-Band Management
Answer: A,B
NEW QUESTION 32
For SAN zoning of E-Series systems, what type of relationship between host ports and storage system ports is a common industry practice?
- A. many-to-many
- B. two-to-two
- C. many-to-one
- D. one-to-one
Answer: D
NEW QUESTION 33
Which object provides read/write access to a Snapshot image?
- A. Snapshot group
- B. Base volume
- C. Snapshot volume
- D. Snapshot repository
Answer: C
NEW QUESTION 34
Which iSCSI setting would you change from its default value to increase the throughput of an iSCSI host port on a NetApp E-Series system?
- A. maximum transmission unit (MTU)
- B. flow control
- C. Time to Live (TTL)
- D. Challenge-Handshake Authentication Protocol (CHAP)
Answer: A
NEW QUESTION 35
......
NetApp NS0-516 Exam Certification Details:
| Exam Code | NS0-516 NCIE SAN Specialist E-Series |
| Exam Name | Implementation Engineer SAN Specialist E-Series |
| Recommended Training | E-Series Fundamentals (WBT) Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems (ILT) |
| Exam Price | $150 USD |
| Passing Score | 75% |
Latest 2022 Realistic Verified NS0-516 Dumps: https://torrentking.practicematerial.com/NS0-516-questions-answers.html
